Varicam LT Run/Stop
Hello everybody!
Last week I was on a one day job with Panasonic Varicam LT and this was my setup: WCU-4 + SXU-1 Cforce Mini + Cforce RF Motor, all looped to a Lcube and CineRT. I've connected the RF motor with the Cam Y cable (Dtap/Hirose) to the camera but it was not possible to Run/Stop with the handset (so run/stop was by pressing the button from camera). Also... while shooting a take, the camera stop recording all of the sudden so I decided to unplugged the Hirose connector and this never happened again.
Is anybody experienced this problems? I'm shooting next week with the Varicam LT again and same setup.
Thanks to all
101 Views
I haven't tried it but you could also try a lcube2 Into the 12 pin hirose on the body then use the LBus ports to your chain and see if the trigger/LDA passes with that. I lost access to all the Vatican lts I worked with in the last round of fires here in la but if I find some later and have my lcube2 with me I'll give it a shot and report back